R-34 scale model project... Completed, but a few more minor steps to do yet.

Completed!! After two years of dealing with it, here is a first sneak peak picture of my R-34 model still sitting in it's work cradle right after I finished the color graphic paint work and decaling work. What looks like is black on the nose and tail, as well as the rudders, is actually a medium dark blue. I could not match the decals up to that detail. A minor glitch in my eyes. This first picture was taken in not very good light, and it makes this color differentiation look worse than it is.After I have the model top dull clear coated, I will get better pictures of it after it is hanging up. For now, you guys are seeing it first, right here in these pics, the results of my two year study and work on the model of this historic airship, which in my eyes is one of the most beautiful airships that was ever built. That is why I wanted a model of it.

These two pictures (immediately above) shows the model right after the final top clear coat was applied to the thing, today, April 20, 2014.

Completed R-34 cars before I installed them on the model last week, April 13th. The control car is 1-1/2" long. They are made completely out of hand shaped block balsa wood. The "radiators" are just tiny squares of acid free printer paper that I painted black. That holds for the windows and door openings as well.

(Above) A first portrait picture of the freshly completed and hung R-34 next to the same scale Shenandoah model in my hobby room/ mini airship museum. I will post more pictures of the completed model in it's own separate wrap up post in this blog, later. But for now, enjoy this picture of the two ships of Zachary Lansdowne, together.

Jim.

R-34 scale model project... Almost there, but not quite.

Here are some teaser pictures for now. Yesterday and today, I finished all the detail work to the cars, made and attached the propellers, and permanently glued the cars to the ship. Now that remains to be done is the rudder and elevator flap as well as nose and tail cone "Bullseye" red white and blue paint work, and the decals. After that it can be sealed and called done.

Jim.

R-34 scale model project...Refabricated the aft car!!

I had to start from scratch, today all over again , as far as the aft engine car goes. It seems that after I was done mocking up the model with all the cars in place, that something did not look right. Here, compared to the wing cars, the aft car was too small, so I had to totally make a new one for the model. The aft car on the R-34 is the same height and width as the wing cars, but since it has TWO engines front to back in it, driving one 17 foot diameter propeller, the car is about 25 percent longer than the single engine wing cars. So I made a new one in the appropriate bigger size. NOW the model looks balanced, and aesthetically correct. All the cars were then refitted, and the model was checked for overall alignment and proportion correctness of the cars, keeping on tweaking until I felt happy with how the model airship looks to me. The cars are now ready to have the woodgrain in them sealed, to get them ready to spray paint silver, and then top dull clear coat them before the window and door details are applied. Then and only then can they be attached to the hull permanently. I guess I should actually fabricate the four propellers, paint them and attach them to the cars before I glue the cars to the hull beforehand. That is where I'm at right now. Here are pictures of the model with the corrected aft car in place and all dryfitting of all the cars to the hull completed.

Jim.

R-34 scale model project... All cars completed!

As the title says, I finished fabricating the wing cars, today, completing the set needed for this ship. It took a while to dry fit them so that they hung half decently below the hull. I also permanently  placed the gondola locator pins in the hull in their appropriate places for positively locating the completed painted  and detailed cars later.That is what is next. details such as making the window, hatch, and  door decals after the grain is sealed and sanded, then painted. Here are the pictures showing the control car and all three engine cars in place. Model is really taking shape, now.

Jim.

R-34 scale model project...Dry fitting control car to the hull.

Here are the latest progress photos. I just got done dry fitting the completed control car assembly to the hull. I need to apply sanding sealer to it, then ever so lightly sand it before I can paint and detail it. I just installed all the hull mounting struts and the two ladder tubes to the car, yesterday. But next, I have to make the other three cars. The aft car, and the two wing cars. I will do them next before I seal and sand them all before I paint them and permanently glue them to the hull. the way this model looks, now, except for the color, I could make this thing into the L-49, if I wanted to, instead of the R-34. the ships look so similar.

With the rudder and elevator flaps dry fitted to the fins, as well as the control car, the final profile of the dirigible is starting to emerge.

These last pictures I just now added, shows the newly fabricated aft engine car assembly dry fitted into place on the hull of the model. The only major pieces left to make are the two mid ship's wing engine cars. Those will be next. I also fitted what I call the "ram air tubes on the sides of the cars that I think were a combination for the cooling of the engines, and what not. The aft car has two of these, one on each side of the gondola, as it has two engines in it that drove the one propeller in that car.

Jim.

Paper Landmarks Parthenon card stock model kit; Not for the faint of heart modeler!!

For about the last three weeks, I have been working on an imported paper card stock model kit of the Parthenon from Latvia. This has been one of the most intense and at times a frustrating model, as some of the 400 plus parts this kit has are very tiny and must be cut out scored and folded very precisely before the model can be glued together, using white glue. The main problem is keeping the whole thing from warping out of shape as I put the thing together. But my patience is starting to be rewarded as the model is starting to come out nicely in what is the final assembly stages...

This is one of THEE hardest card stock models I have attempted to build. A little frustrating at times. That is when I stop  and let it sit for a couple of days to refresh my brain to keep on going. The instructions that came with the kit are really very poor, and is really only showed in two poor general overall blowup pictures of the sub assembled folded up parts  being assembled into the main model. They do not even show how the individual parts themselves are folded up to be assembled.  Alot of the pieces, you really have to just sit, and study the two exploded view drawings of the model, then study the actual printed part on the paper sheet before you cut out, score for folding, and glue together the piece.

Models of this type, I have designed and built a few, myself, and they are a passion of mine.

The packaging says you can build it in 8 hours. Baloney! This model is so complex, I believe I already have more than two times that amount in it already!! And I consider myself to be a seasoned modeler with close to 50 years experience. This is DEFINITELY not a model for the inexperienced builder. I'm having a bear of a time with it, but it is still fun, and I love a challenge!

After over a three week time period, I easily have about 30-35 hours labor time in this thing. That is, cutting out, scoring the parts, folding them, then gluing the parts together. Then after enough parts are together, you can take those parts and start to assemble the model in steps. Some of the parts were so tiny that I had to have a 100 watt work light aimed at the work board so I could see clearly what I was doing, with my strongest bi-focals on, after a while, my eyes and brain still went wonky on me at times. That is when I would quit for the day and continue to work on it a day or several days later. But other than some minor warpage issues, which I think I was able to correct, I think this model came out beautiful.

To sum it up this way, this is NOT a model for a beginner to try out. Especially with the 400 plus parts the thing has in it in total. The kit says it has 383 parts total, but the 23 inner upper level pillars in the naos where the Athena statue is at, did not have capitals, so I made those out of scrap paper that was left over from that days work and glued them on to the tops of those pillars. The model came out FAR from perfect, but at least I was able to get it to come out.

Select pics of the 1/250th scale paper card stock model. Looks pretty real, don't it?

The Parthenon was/ is quite the beautiful building back in the day and even now, as a ruin. This building is so beloved that a community leader in  Nashville, Tennessee, decided in 1897 to replicate this building full size as it was back in the 430's BC in Athens. It is the only structure of its kind on the planet, other than the original in Athens, Greece, and it is quite spectacular, to say the least.

I have unscrewed the model from the heavy MDF particle board that it was mounted to to keep it from warping as I finished the final assembly on the model, and it worked. The model is no longer twisted like it was when I  started it. I had mounted the model itself directly to a piece of 1/4" drawer box bottom plywood to try and stop the warping, but that did not work, so that is when I screwed the whole get-go to the high density particle board, which is absolutely impervious to warping, and it will hold a true flat plane forever, as long as it is not directly exposed to liquids.

Anyhow, after I unbolted it, I had to take the whole model to work to trim the plywood base down surrounding the model on all four sides on one of our industrial table saws, so that the plywood base looks like a fourth step. The proportions of the model with that extra step looks fantastic. I intend to laminate the excess blank paper that was left over from the kit to the exposed plywood edges to make the base look like a part of the model, in the form of that fourth step. Pictures will follow after I'm done doing this. The plywood has about an eighth inch reveal all the way around the model, now.

Heavy 15 inch long molded clear acrylic (plexiglas) display box protects the model from dust, moisture and impact damage, now. This box is much more resilient from impact damage than the clear polystyrene display boxes they make for model cars. The model is secured to the display box base with two very short flush head sheet metal screws.

As I suspected, A C Moore had these in stock in several sizes, and this one was the only one in stock big enough to fit my model.

 East end pediment view of model in display box with model identification tag that I printed out for it.

I'm planning on doing another one of these Parthenon kits... not happy how this one came out. I ordered two more of these kits from a place that has them in California.

Because the instructions do not give an assembly order sequence that is specific enough for this model, there are some parts I had to specifically modify and/ or purposely damage to get them to fit. With the experience of building one under my belt, this second model when I do it will not only come out better, but I'll probably be able to do it in about two-thirds of the time it took me to do this one. I know EXACTLY now how the order of assembly needs to go now in order for the thing to come out not warped and twisted. You know the old saying,"Hind sight is always 100%". This second model, I will not feel like I am "stumbling around in the dark" so to speak like I did with this one.

Jim.